[Steps] How To Install TWRP Recovery In Galaxy Star Pro Or Plus

Now Unlock and root Samsung Galaxy Star Pro or Plus(S7260,S7262) running on android jellybean 4.2.2 by Flashing Custom recovery in it.Thanks to XDA dev FireLord FireLord, TWRP recovery for Samsung Galaxy Start Pro/Plus.TWRP recovery are used to gain root access by flashing the latest Super Su.zip file
no matter which android version it is jellybean,kitkat,lollipop etc.

[Steps] How To Install TWRP Recovery In Galaxy Star Pro Or Plus

Samsung Galaxy Start Pro and Plus is a Low budget device with good development , having CM10.1,CWM recovery and Now TWRP recovery for it.Download TWRP recovery for Samsung Galaxy Star PRO and Plus and Follow below guide on How to Flash TWRP recovery in Samsung Galaxy Star Pro or Plus.

You must have a PC to root your device and you can root your device easily by following our fully explained Step by step tutorial without any problem.

#Requirements

1.You must have a PC or Laptop with you.

2.Download Latest version of ODINv3.1.exe.

3.Download TWRP recovery for Samsung Galaxy J5

4.Download Samsung Driver and install it in your PC.

5.Make sure to do back of your data.

After Download the Above File follow
below steps to Root Samsung Galaxy J5.Install the Samsung driver and
Odin in your Pc first. 

Warning: We
gammerson.com is not responsible, if you damage or brick your device.
Do it at your own risk and follow the instructions properly. 

►How to Flash TWRP recovery in Galaxy Star Pro or Plus

 
1.After downloading  twrp-recovery-v2.8.1.0.zip extract it and place it in a folder.
 
2.Now open Odin.exe in you computer or laptop.
 
3.Now turn off your Galaxy Star Pro or Plus.Then turn it on by pressing (Volume Down + Home Button + Power Key)
simultaneously,Now you will see warning message just press volume up
button to skip it and it will reboot your device into Download Mode.
 
4.Now connect your Device with PC using Data Cable.
 
5.When you connect it the ID:Com box will turn blue in ODIN.
 
6.Just click on AP or PDA(if you have any other version of ODIN) tab in Odin and select the exacted file of twrp-recovery-v2.8.1.0.tar from where you extracted it.
 
7.Make sure that you have the select the settings according to below image.

[Steps] How To Install TWRP Recovery In Galaxy Star Pro Or Plus

8.Now
click on start and wait for the process to complete after the process
completed you device will be rebooted and remove it from pc.
 
9.You just flash TWRP recovery in your Device.

Q1.Not able to boot into system or my phone is stuck at Samsung (Bootsplash)
 
►Steps

1.Go back to recovery and wipe data, wipe cache, wipe dalvik 

2.Flash stock rom of your device from recovery.

3.Then flash recovery again.

Leave a Comment

This site uses Akismet to reduce spam. Learn how your comment data is processed.