Download LG V10 Android Nougat Firmware (Nougat KDZ)(F600L/k/S)

0

The LG  V10 sports a 16-megapixel rear camera with PDAF (phase detection autofocus), an f/2.0 aperture  and dual-tone LED flash. The 8-megapixel front camera sports an 84-degree wide angle lens.It comes with Snapdragon 808 hexacore Processor.It comes with 3000 mAh battery capacity which can last for more than a day with mixed usage.You can expand its memory via micro sd-card/.Today in this article we will guide you to install nougat in LG V10.

Image result for LG v10

Disclaimer:

Gammerson.com is not responsible for any damage happened to your device(s) while following this guide, Proceed at your own risk

Requirements:

  • This method is only for the LG 10 .Donot try it on any other device.
  • It is advisable to take a backup of your device before proceeding further.
  • Ensure that your phone has at least 70-80% charged to prevent the accidental shutdown in-between the process.

Downloads:

  • LG USB DRIVER
  • LG FLASH TOOL

    0 Android Nougat Firmware

    LG V10 F600S Nougat Firmware v30d

    • LG V10 Nougat KDZ file for F600s – Download

    LG V10 F600L Nougat Firmware v30e

    • LG V10 Nougat KDZ file for F600s – Download

    Download Korean LG V10 F600L Nougat Firmware v30d

    • LG V10 Nougat KDZ file for F600s – Download

    Download AT&T LG V10 H900 Nougat Firmware

    • Download AT&T LG V10 KDZ File – Coming Soon

    Download Verizon LG V10 VS990 Nougat Firmware

    • Download Nougat KDZ for Verizon LG V10 – Coming Soon

    Download T-Mobile LG V10 H901 Nougat Firmware

    • Download T-Mobile LG V10 Nougat Firmware KDZ File – Coming Soon

Steps to Install Nougat in LG V10

  • First of all,you need to download and Install LG Flash tool on your PC
  • Then,install the stock firmware for your LG V10 from your download section.
  • After that, Boot your LG V10 into the download mode.
  • Open LG Flash tool on your computer (tapping LGFlashtool2014.exe)
  • Once launched, Choose CDMA type from the menu on your device.
  • The,Go to “Select Kdz file”, find and locate the downloaded stock firmware on your device
  • You donot need to do any changes just use the normal flash for flashing.
  • After that,for starting the flashing process you have to click it.

Note that It will take some time for flashing the device.

  • After the flashing process over,now your device unbricks and you are on stock firmware.
  • Done!!Enjoy!!

If still any queries left in your mind,feel free to ask via comment section.

LEAVE A REPLY