Home » Download and Install Android 7.1.2 Resurrection Remix Nougat ROM on OnePlus 3T
development download root

Download and Install Android 7.1.2 Resurrection Remix Nougat ROM on OnePlus 3T

If you are Resurrection Remix ROM lover and oneplus 3T owner then this article is for you sure as in this we will tell you how can you download resurrection remix which is based on Android 7.1.2 Nougat on your oneplus 3T

The Oneplus 3T sports a 16-megapixel rear camera with PDAF (phase detection autofocus), an f/2.0 aperture and dual-tone LED flash with EIS & OIS. The 16-megapixel front camera sports an 84-degree wide angle lens.It has a superb Snapdragon 821 processor.It comes with 3400 mAh battery capacity which can last for more than a day with mixed usage.It comes with dash charge which charges your phone faster.So in this article,we will guide you to explain the process of installing Android 7.1.2 Nougat Resurrection Remix ROM on ONEPLUS 3T.


Gammerson.com is not responsible for any damage happened to your device(s) while following this guide, Proceed at your own risk


  • This method is only for the Oneplus 3T .Donot try it on any other device.
  • It is advisable to take a backup of your device before proceeding further.
  • Ensure that your phone has at least 70-80% charged to prevent the accidental shutdown in-between the process.
  • Rooted Device
  • Twrp installed device


RR-N-v5.8.3-***-kenzo-Nightly.zip– RR rom


Steps to install Resurrection Remix on Oneplus 3T

Step 1 – Download Android 7.1 custom ROM from the download section and Google Apps for OnePlus 3T on the computer.

Step 2 – Connect and mount the phone’s USB mass storage on computer with the USB cable.

Step 3 – Copy the downloaded ROM zip file to the root folder on the phone’s SD card.

Step 4 – Power off the phone and disconnect its USB cable from computer.

Step 5 – Boot the device into Recovery Mode by pressing and holding Volume Down and Power buttons on your phone until it enters the main recovery screen.

Step 6 – Once the phone enters into CWM/TWRP Recovery, perform a full data wipe task by clicking Wipe Data/Factory Reset. Use the Volumekeys to navigate between options and the Powerbutton to select an option in the Recovery Mode.

Step 7 – Then, perform Wipe Cache Partition and wait until the process completes.

Step 8 – Perform Wipe Dalvik Cache as well. To do this, go to the ‘advanced’option and then click Wipe Dalvik Cache. This will help in preventing boot loop issues or any boot ROM related errors during firmware installation.

Step 9 – Return to the main recovery menu and choose Install Zip from SD card.

Step 10 – Click Choose Zip from SD card. Use volume keys to navigate to the CyanogenMod ROM zip file that you copied earlier to your phone’s SD card and choose it by tapping the Power button. Confirm the ROM installation on the next screen and the installation process will begin.

Note: Repeat Step 9 and Step 10 to install Google Apps (Gapps) as well.

Step 11 – Once both the Gapps and ROM are installed, choose “+++++Go Back+++++” and select Reboot System Now in the Recovery menu


If still any queries left in your mind,feel free to ask us in the comment section

About the author

Himalaya Saxena

A web developer, Tech Enthusiast, debugger, blogger, and programmer.
I have the thirst to learn and create :)

Add Comment

Click here to post a comment