Download and Flash TWRP Recovery in Samsung Galaxy S6

April 13, 2015

Now waiting is over now as now you can Flash TWRP recovery in Your Samsung Galaxy S6 .Today we will show you how to install TWRP recovery in your Samsung Galaxy S6 (zeroflte).As this is latest Custom Recovery of Samsung Galaxy S6 that is TWRP recovery 2.8.6.As we all know that we can install Custom Roms,take Nandroid back and even get Root access using Custom Recovery.SM-G920F variant of SGS6 and Galaxy S6 edge SM-G925T

Download-TWRP-Recovery-For-Samsung-galaxy-S6

We will share you three easy methods of Installing/Flashing Latest Twrp Recovery in your Samsung Galaxy S6 (zeroflte).
Now you can Root your Samsung galaxy S6 without voiding Warranty and tripping Knox counter you can check it here.Using Pingpong root tool.

Contents

1 #How to install/Flash TWRP recovery In Samsung Galaxy S6
2 #Installing TWRP using TWRP manager.apkAPP.
3 #Flashing Via ODIN
4 #Using adb shell or a terminal emulator app(DD method)

#How to install/Flash TWRP recovery In Samsung Galaxy S6

►Method 1:

#Installing TWRP using TWRP manager.apkAPP.

1.Firstly Download this APP called TWRP manager and install it from below link.

►Twrp Manager.apk (from playstore)

►Twrp Manager.apk (Directly)

2.Now Open the app and Tap on Install TWRP.
3.Now Select you device Samsung Galaxy S6 also know as zeroflte.
4.Now Tap on Install TWRP recovery.
5.Then The Latest TWRP will download and installed automatically.

►Method 2: (Without Rooting)

#Flashing Via ODIN

1.Download and install Odin on your PC.
2.Once you have
Odin installed in your PC the TWRP recovery.tar file from the
download link.

►Download TWRP.tar
3.Power off your device. Turn on your device using
the proper key combo to get into download mode and attach the device to
your computer via a USB cable.
4.Use the PDA tab or button to browse to
and select the tar file that you downloaded and flash the device.

#How to Boot in to Download Mode in Samsung galaxy S6
Note:You can Boot in to Download Mode By pressing and Hold Volume Down ,Power button and Home Button at the same time for 5 to 6 sec.and the press volume Up to Continue to boot into Download mode.

►Method 3(Root Required)

#Using adb shell or a terminal emulator app(DD method)

1.Download the latest image file (.img) from the download link below.

►Download TWRP.img

2.Place it in the root of your /sdcard folder and rename it to twrp.img.

3.Now open ADB shell or Terminal Emulator App and Run the following commands.

su

dd if=/sdcard/twrp.img of=/dev/block/platform/15570000.ufs/by-name/RECOVERY

Done!! If you face any problem You can comment and Don’t Forget to say thanks and we are giving special thanks to TWRP team for Building TWRP recovery for Samsung Galaxy S6.